You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdelibs/tdeui/tdelistview.h

1096 lines
32 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

/* This file is part of the KDE libraries
Copyright (C) 2000 Reginald Stadlbauer <reggie@kde.org>
Copyright (C) 2000 Charles Samuels <charles@kde.org>
Copyright (C) 2000 Peter Putzer <putzer@kde.org>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License version 2 as published by the Free Software Foundation.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public License
along with this library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#ifndef KLISTVIEW_H
#define KLISTVIEW_H
#include <tqheader.h>
#include <tqlistview.h>
#include <tqptrlist.h>
#include <tdelibs_export.h>
class TQDragObject;
class TDEConfig;
class KLineEdit;
/**
* This Widget extends the functionality of TQListView to honor the system
* wide settings for Single Click/Double Click mode, AutoSelection and
* ChangeCursorOverLink (TM).
*
* There is a new signal executed(). It gets connected to either
* TQListView::clicked() or TQListView::doubleClicked() depending on the KDE
* wide Single Click/Double Click settings. It is strongly recommended that
* you use this signal instead of the above mentioned. This way you don´t
* need to care about the current settings.
* If you want to get informed when the user selects something connect to the
* TQListView::selectionChanged() signal.
*
* Drag-and-Drop is supported with the signal dropped(), just setAcceptDrops(true)
* and connect it to a suitable slot.
* To see where you are dropping, setDropVisualizer(true).
* And also you'll need acceptDrag(TQDropEvent*)
*
* TDEListView is drag-enabled, too: to benefit from that you have to derive from it.
* Reimplement dragObject() and (possibly) startDrag(),
* and setDragEnabled(true).
*/
class TDEUI_EXPORT TDEListView : public TQListView
{
friend class TDEListViewItem;
Q_OBJECT
TQ_ENUMS( SelectionModeExt )
TQ_PROPERTY( bool fullWidth READ fullWidth WRITE setFullWidth )
TQ_PROPERTY( bool itemsMovable READ itemsMovable WRITE setItemsMovable )
TQ_PROPERTY( bool itemsRenameable READ itemsRenameable WRITE setItemsRenameable )
TQ_PROPERTY( bool dragEnabled READ dragEnabled WRITE setDragEnabled )
TQ_PROPERTY( bool autoOpen READ autoOpen WRITE setAutoOpen )
TQ_PROPERTY( bool dropVisualizer READ dropVisualizer WRITE setDropVisualizer )
TQ_PROPERTY( int tooltipColumn READ tooltipColumn WRITE setTooltipColumn )
TQ_PROPERTY( int dropVisualizerWidth READ dropVisualizerWidth WRITE setDropVisualizerWidth )
TQ_PROPERTY( TQColor alternateBackground READ alternateBackground WRITE setAlternateBackground )
TQ_PROPERTY( bool shadeSortColumn READ shadeSortColumn WRITE setShadeSortColumn )
TQ_OVERRIDE( SelectionModeExt selectionMode READ selectionModeExt WRITE setSelectionModeExt )
public:
/**
* Possible selection modes.
*
* The first four correspond directly to TQListView::SelectionMode, while
* the FileManager selection mode is defined as follows:
* @li home: move to the first
* @li end: move to the last
* @li PgUp/PgDn: move one page up/down
* @li up/down: move one item up/down
* @li insert: toggle selection of current and move to the next
* @li space: toggle selection of the current
* @li CTRL+up: move to the previous item and toggle selection of this one
* @li CTRL+down: toggle selection of the current item and move to the next
* @li CTRL+end: toggle selection from (including) the current
* item to (including) the last item
* @li CTRL+home: toggle selection from (including) the current
* item to the (including) the first item
* @li CTRL+PgDn: toggle selection from (including) the current
* item to (excluding) the item one page down
* @li CTRL+PgUp: toggle selection from (excluding) the current
* item to (including) the item one page up
*
* The combinations work the same with SHIFT instead of CTRL, except
* that if you start selecting something using SHIFT everything selected
* before will be deselected first.
*
* Additionally the current item is always selected automatically when
* navigating using the keyboard, except other items were selected explicitly.
*
* This way e.g. SHIFT+up/PgUp then SHIFT+down/PgDn leaves no item selected
*/
enum SelectionModeExt {
Single = TQListView::Single,
Multi = TQListView::Multi,
Extended = TQListView::Extended,
NoSelection = TQListView::NoSelection,
FileManager
};
/**
* Constructor.
*
* The parameters @p parent and @p name are handled by
* TQListView, as usual.
*/
TDEListView (TQWidget *parent = 0, const char *name = 0);
/**
* Destructor.
*/
virtual ~TDEListView();
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void setAcceptDrops (bool);
/**
* This function determines whether the given coordinates are within the
* execute area. The execute area is the part of a TQListViewItem where mouse
* clicks or double clicks respectively generate a executed() signal.
* Depending on TQListView::allColumnsShowFocus() this is either the
* whole item or only the first column.
* @return true if point is inside execute area of an item, false in all
* other cases including the case that it is over the viewport.
*/
virtual bool isExecuteArea( const TQPoint& point );
/**
* Same thing, but from an x coordinate only. This only checks if x is in
* the first column (if all columns don't show focus), without testing if
* the y coordinate is over an item or not.
*/
bool isExecuteArea( int x );
/**
* @return a list containing the currently selected items.
*
* @deprecated
*/
TQPtrList<TQListViewItem> selectedItems() const;
/**
* @return a list containing the currently selected items.
*
* @param includeHiddenItems Set to true to return all items regardless of
* visibility. Set to false to only return items that are isVisible().
*
* @return a list of all selected listview items
*
* @since 3.4
*/
TQPtrList<TQListViewItem> selectedItems(bool includeHiddenItems) const; // ### BIC: KDE 4: use an implicitly shared class! (QValutList?) and merge with above, default to true
/**
* Arbitrarily move @p item to @p parent, positioned immediately after item @p after.
* If after is 0, @p item is made the first child of @p parent.
*
* (Un-deprecated in kde-3.4)
*/
void moveItem(TQListViewItem *item, TQListViewItem *parent, TQListViewItem *after);
/**
* @return the last item (not child!) of this listview.
*
* @see lastChild()
*/
TQListViewItem *lastItem() const;
/**
* @return the last child of this listview.
*
* @see lastItem()
*/
TQListViewItem* lastChild () const;
/**
* @return the lineedit used for inline renaming.
* Use that to setup a KCompletion or TQValidator for the lineedit
*
* @since 3.2
*/
KLineEdit* renameLineEdit() const;
/**
* @returns if it is legal to move items in the list view. True by default.
*
* @see setDragEnabled()
* @see setItemsMovable()
*/
bool itemsMovable() const;
/**
* @return whether inplace-renaming has been enabled. False by default.
*
* @see setItemsRenameable()
*/
bool itemsRenameable() const;
/**
* @return whether dragging is enabled. False by default.
*
* @see setDragEnabled()
*/
bool dragEnabled() const;
/**
* @return true if AutoOpen is enabled (not implemented currently).
*
* @see setAutoOpen()
*/
bool autoOpen() const;
/**
* @return true if @p column is renamable.
*
* @see setRenameable()
*/
bool isRenameable (int column) const;
/**
* @return true if drawing of the drop-visualizer has been enabled. True by default.
*
* @see setDropVisualizer()
*/
bool dropVisualizer() const;
/**
* @return the column for which tooltips are displayed (or -1 if none set).
*
* @see setTooltipColumn()
*/
int tooltipColumn() const;
/**
* For future expansions.
*
* Do not use.
* @deprecated
*/
bool createChildren() const KDE_DEPRECATED;
/**
* @return true if drawing of the drop-highlighter has been enabled. False by default.
*
* @see setDropHighlighter()
*/
bool dropHighlighter() const;
/**
* The dropVisualizerWidth defaults to 4.
*
* @see setDropVisualizerWidth()
* @return the current width of the drop-visualizer.
*/
int dropVisualizerWidth () const;
/**
* @return the "extended" selection mode of this listview.
*
* @see SelectionModeExt
* @see setSelectionModeExt
*/
SelectionModeExt selectionModeExt () const;
/**
* Returns the index of @p item within the item tree or -1 if
* @p item doesn't exist in this list view. This function takes
* all items into account not only the visible ones.
*/
int itemIndex( const TQListViewItem *item ) const;
/**
* Returns the item of @p index within the item tree or 0 if
* @p index doesn't exist in this list view. This function takes
* all items into account not only the visible ones.
*/
TQListViewItem* itemAtIndex(int index);
/**
* @deprecated
* @see setFullWidth()
*/
void setFullWidth() KDE_DEPRECATED;
/**
* Let the last column fit exactly all the available width.
*
* @see fullWidth()
*/
void setFullWidth(bool fullWidth);
/**
* Returns whether the last column is set to fit the available width.
*
* @see setFullWidth()
*/
bool fullWidth() const;
/**
* Reimplemented for full width support
*
* @see removeColumn()
*/
virtual int addColumn(const TQString& label, int width = -1);
/**
* Reimplemented for full width support
*/
virtual int addColumn(const TQIconSet& iconset, const TQString& label, int width = -1);
/**
* Reimplemented for full width support
*
* @see addColumn()
*/
virtual void removeColumn(int index);
/**
* sets the alternate background background color.
* This only has an effect if the items are TDEListViewItems
*
* @param c the color to use for every other item. Set to an invalid
* color to disable alternate colors.
*
* @see alternateBackground()
**/
void setAlternateBackground(const TQColor &c);
/**
* @return the alternate background color
*
* @see setAlternateBackground()
*/
const TQColor &alternateBackground() const;
/**
* Saves the list view's layout (column widtsh, column order, sort column)
* to a TDEConfig group
*
* @param config the TDEConfig object to write to
* @param group the config group to use
*/
void saveLayout(TDEConfig *config, const TQString &group) const;
/**
* Reads the list view's layout from a TDEConfig group as stored with
* saveLayout
*
* @param config the TDEConfig object to read from
* @param group the config group to use
*/
void restoreLayout(TDEConfig *config, const TQString &group);
/**
* Reimplemented to remember the current sort column and order.
* @param column is the column to be sorted, or -1 to sort in order of
* insertion
* @param ascending whether to sort ascending (or descending)
*/
virtual void setSorting(int column, bool ascending = true);
/**
* @return the currently sorted column, or -1 if none is sorted
*/
int columnSorted(void) const;
/**
* @return whether the current sort is ascending (or descending)
*/
bool ascendingSort(void) const;
/**
* Reimplemented for internal reasons.
*/
virtual void takeItem(TQListViewItem *i);
/**
* Set to true if the currently sorted column should be drawn shaded. Defaults to true
* @param shadeSortColumn True if sort column should be shaded.
*
* @since 3.4
*/
void setShadeSortColumn(bool shadeSortColumn);
/**
* See if the sort column should be drawn shaded
* @return true if the sort column should be shaded
*
* @since 3.4
*/
bool shadeSortColumn(void) const;
signals:
/**
* This signal is emitted whenever the user executes an listview item.
* That means depending on the KDE wide Single Click/Double Click
* setting the user clicked or double clicked on that item.
* @param item is the pointer to the executed listview item.
*
* Note that you may not delete any TQListViewItem objects in slots
* connected to this signal.
*/
void executed( TQListViewItem *item );
/**
* This signal is emitted whenever the user executes an listview item.
* That means depending on the KDE wide Single Click/Double Click
* setting the user clicked or double clicked on that item.
* @param item is the pointer to the executed listview item.
* @param pos is the position where the user has clicked
* @param c is the column into which the user clicked.
*
* Note that you may not delete any TQListViewItem objects in slots
* connected to this signal.
*/
void executed( TQListViewItem *item, const TQPoint &pos, int c );
/**
* This signal gets emitted whenever something acceptable is
* dropped onto the listview.
*
* @param e is the drop event itself (it has already been accepted)
* @param after is the item after which the drop occurred (or 0L, if
* the drop was above all items)
*
* @see acceptDrop()
*/
void dropped (TQDropEvent * e, TQListViewItem *after);
/**
* This signal gets emitted whenever something acceptable is
* dropped onto the listview.
*
* This is an overloaded version of the above (provided to simplify
* processing drops outside of the class).
*
* @param list is the listview
* @param e is the drop event itself (it has already been accepted)
* @param after is the item after which the drop occurred (or 0L, if
* the drop was above all items
*/
void dropped (TDEListView* list, TQDropEvent* e, TQListViewItem* after);
/**
* This signal gets emitted whenever something acceptable is
* dropped onto the listview.
*
* This function also provides a parent, in the event that your listview
* is a tree
* @param list is the listview
* @param e is the drop event itself (it has already been accepted)
* @param parent the item that is to be the parent of the new item
* @param after is the item after which the drop occurred (or 0L, if
* the drop was above all items
*/
void dropped (TDEListView* list, TQDropEvent* e, TQListViewItem* parent, TQListViewItem* after);
/**
* This signal gets emitted whenever something acceptable is
* dropped onto the listview.
*
* This function also provides a parent, in the event that your listview
* is a tree
* @param e is the drop event itself (it has already been accepted)
* @param parent the item that is to be the parent of the new item
* @param after is the item after which the drop occurred (or 0L, if
* the drop was above all items
*/
void dropped (TQDropEvent* e, TQListViewItem* parent, TQListViewItem* after);
/**
* This signal is emitted when ever the user moves an item in the list via
* DnD.
* If more than one item is moved at the same time, this signal is only emitted
* once.
*/
void moved();
/**
* Connect to this signal if you want to do some preprocessing before
* a move is made, for example, to disable sorting
*
* This is sent only once per each groups of moves. That is, for each
* drop that is a move this will be emitted once, before TDEListView calls
* @see moveItem()
*/
void aboutToMove();
/**
* This signal is emitted when ever the user moves an item in the list via
* DnD.
* If more than one item is moved at the same time, @p afterFirst and
* @p afterNow will reflect what was true before the move.
* This differs from moved(), so be careful. All the items will have been
* moved before moved() is emitted, which is not true in this method. // FIXME
* @param item the item that was moved
* @param afterFirst the item that parameter item was in before the move, in the list
* @param afterNow the item it's currently after.
*/
void moved (TQListViewItem *item, TQListViewItem *afterFirst, TQListViewItem *afterNow);
/**
* This signal is emitted after all the items have been moved. It reports info for
* each and every item moved, in order. The first element in @p items associates
* with the first of afterFirst and afterNow.
*/
void moved(TQPtrList<TQListViewItem> &items, TQPtrList<TQListViewItem> &afterFirst, TQPtrList<TQListViewItem> &afterNow);
/**
* This signal gets emitted when an item is renamed via in-place renaming.
*
* @param item is the renamed item.
* @param str is the new value of column @p col.
* @param col is the renamed column.
*/
void itemRenamed(TQListViewItem* item, const TQString &str, int col);
/**
* Same as above, but without the extra information.
*/
void itemRenamed(TQListViewItem* item);
/**
* This signal is emitted when the shortcut key for popup-menus is pressed.
*
* Normally you should not use this, just connect a slot to signal
* contextMenu (TDEListView*, TQListViewItem*, const TQPoint&) to correctly
* handle showing context menus regardless of settings.
*
* @param list is this listview.
* @param item is the currentItem() at the time the key was pressed. May be 0L.
*/
void menuShortCutPressed (TDEListView* list, TQListViewItem* item);
/**
* This signal is emitted whenever a context-menu should be shown for item @p i.
* It automatically adjusts for all settings involved (Menu key, showMenuOnPress/Click).
*
* @param l is this listview.
* @param i is the item for which the menu should be shown. May be 0L.
* @param p is the point at which the menu should be shown.
*/
void contextMenu (TDEListView* l, TQListViewItem* i, const TQPoint& p);
void itemAdded(TQListViewItem *item);
void itemRemoved(TQListViewItem *item);
public slots:
/**
* Rename column @p c of @p item.
*/
virtual void rename(TQListViewItem *item, int c);
/**
* By default, if you called setItemsRenameable(true),
* only the first column is renameable.
* Use this function to enable the feature on other columns.
*
* If you want more intelligent (dynamic) selection,
* you'll have to derive from TDEListView,
* and override rename() and call only call it
* if you want the item to be renamed.
*/
void setRenameable (int column, bool yesno=true);
/**
* Set whether items in the list view can be moved.
* It is enabled by default.
*
* @see itemsMovable()
*/
virtual void setItemsMovable(bool b);
/**
* Enables inplace-renaming of items.
* It is disabled by default.
*
* @see itemsRenameable()
* @see setRenameable()
*/
virtual void setItemsRenameable(bool b);
/**
* Enable/Disable the dragging of items.
* It is disabled by default.
*/
virtual void setDragEnabled(bool b);
/**
* Enable/Disable AutoOpen (not implemented currently).
*/
virtual void setAutoOpen(bool b);
/**
* Enable/Disable the drawing of a drop-visualizer
* (a bar that shows where a dropped item would be inserted).
* It is enabled by default, if dragging is enabled
*/
virtual void setDropVisualizer(bool b);
/**
* Set the width of the (default) drop-visualizer.
* If you don't call this method, the width is set to 4.
*/
void setDropVisualizerWidth (int w);
/**
* Set which column should be used for automatic tooltips.
*
* @param column is the column for which tooltips will be shown.
* Set -1 to disable this feature.
*/
virtual void setTooltipColumn(int column);
/**
* Enable/Disable the drawing of a drop-highlighter
* (a rectangle around the item under the mouse cursor).
* It is disabled by default.
*/
virtual void setDropHighlighter(bool b);
/**
* For future expansions.
*
* Do not use.
* @deprecated
*/
virtual void setCreateChildren(bool b) KDE_DEPRECATED;
/**
* Set the selection mode.
*
* A different name was chosen to avoid API-clashes with TQListView::setSelectionMode().
*/
void setSelectionModeExt (SelectionModeExt mode);
/**
* Enable/disable tabbing between editable cells
* @since 3.1
*/
void setTabOrderedRenaming(bool b);
/**
* Returns whether tab ordered renaming is enabled
* @since 3.1
*/
bool tabOrderedRenaming() const;
/**
* Override TQListView selectAll() so that filtered
* items are not selected
*
* @since 14.0
*/
virtual void selectAll( bool select );
protected:
/**
* Determine whether a drop on position @p p would count as
* being above or below the TQRect @p rect.
*
* @param rect is the rectangle we examine.
* @param p is the point located in the rectangle, p is assumed to be in
* viewport coordinates.
*/
inline bool below (const TQRect& rect, const TQPoint& p)
{
return (p.y() > (rect.top() + (rect.bottom() - rect.top())/2));
}
/**
* An overloaded version of below(const TQRect&, const TQPoint&).
*
* It differs from the above only in what arguments it takes.
*
* @param i the item whose rect() is passed to the above function.
* @param p is translated from contents coordinates to viewport coordinates
* before being passed to the above function.
*/
inline bool below (TQListViewItem* i, const TQPoint& p)
{
return below (itemRect(i), contentsToViewport(p));
}
/**
* Reimplemented to reload the alternate background in palette changes.
* @internal
*/
virtual bool event( TQEvent * );
/**
* Emit signal executed.
* @internal
*/
void emitExecute( TQListViewItem *item, const TQPoint &pos, int c );
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void focusInEvent(TQFocusEvent* fe);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void focusOutEvent( TQFocusEvent *fe );
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void leaveEvent( TQEvent *e );
/**
* @return the tooltip for @p column of @p item.
*/
virtual TQString tooltip(TQListViewItem* item, int column) const;
/**
* @return whether the tooltip for @p column of @p item shall be shown at point @p pos.
*/
virtual bool showTooltip(TQListViewItem *item, const TQPoint &pos, int column) const;
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsDragMoveEvent (TQDragMoveEvent *event);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsMousePressEvent( TQMouseEvent *e );
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsMouseMoveEvent( TQMouseEvent *e );
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsMouseDoubleClickEvent ( TQMouseEvent *e );
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsDragLeaveEvent (TQDragLeaveEvent *event);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsMouseReleaseEvent (TQMouseEvent*);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsDropEvent (TQDropEvent*);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void contentsDragEnterEvent (TQDragEnterEvent *);
/**
* @return a dragobject encoding the current selection.
*
* @see setDragEnabled()
*/
virtual TQDragObject *dragObject();
/**
* @return true if the @p event provides some acceptable
* format.
* A common mistake is to forget the "const" in your reimplementation
*/
virtual bool acceptDrag (TQDropEvent* event) const;
/**
* Paint the drag line. If painter is null, don't try to :)
*
* If after == 0 then the marker should be drawn at the top.
*
* @return the rectangle that you painted to.
*/
virtual TQRect drawDropVisualizer (TQPainter *p, TQListViewItem *parent, TQListViewItem *after);
/**
* Paint the drag rectangle. If painter is null, don't try to :)
*
*
* @return the rectangle that you painted to.
*/
virtual TQRect drawItemHighlighter(TQPainter *painter, TQListViewItem *item);
/**
* This method calls dragObject() and starts the drag.
*
* Reimplement it to do fancy stuff like setting a pixmap or
* using a non-default DragMode
*/
virtual void startDrag();
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void keyPressEvent (TQKeyEvent*);
/**
* Reimplemented for internal reasons.
* Further reimplementations should call this function or else
* some features may not work correctly.
*
* The API is unaffected.
*/
virtual void viewportPaintEvent(TQPaintEvent*);
/**
* In FileManager selection mode: explicitly activate the mode
* in which the current item is automatically selected.
*/
void activateAutomaticSelection();
/**
* In FileManager selection mode: explicitly deactivate the mode
* in which the current item is automatically selected.
*/
void deactivateAutomaticSelection();
/**
* In FileManager selection mode: return whether it is currently in the mode
* where the current item is selected automatically.
* Returns false if items were selected explicitly, e.g. using the mouse.
*/
bool automaticSelection() const;
/**
* Reimplemented for setFullWidth()
*/
virtual void viewportResizeEvent(TQResizeEvent* e);
/**
* Disable AutoSelection. This overrides the system wide setting for
* AutoSelection. Please don't call this unless you have good reasons to
* override the system wide setting for AutoSelection.
* @see resetAutoSelection()
* @since 3.2
*/
void disableAutoSelection();
/**
* Reset AutoSelection to the system wide setting.
* @see disableAutoSelection()
* @since 3.2
*/
void resetAutoSelection();
/**
* @deprecated This is just here for binary compatibility. Use the signal
* in TQListView instead.
*/
// KDE 4: remove
void doubleClicked( TQListViewItem *item, const TQPoint &pos, int c );
protected slots:
/**
* Update internal settings whenever the global ones change.
* @internal
*/
void slotSettingsChanged(int);
void slotMouseButtonClicked( int btn, TQListViewItem *item, const TQPoint &pos, int c );
void doneEditing(TQListViewItem *item, int row);
/**
* Repaint the rect where I was drawing the drop line.
*/
void cleanDropVisualizer();
/**
* Repaint the rect where I was drawing the drop rectangle.
*/
void cleanItemHighlighter();
/**
* Emit the contextMenu signal. This slot is for mouse actions.
*/
void emitContextMenu (TQListViewItem*, const TQPoint&, int);
/**
* Emit the contextMenu signal. This slot is for key presses.
*/
void emitContextMenu (TDEListView*, TQListViewItem*);
/**
* Accessory slot for AutoSelect
* @internal
*/
void slotOnItem( TQListViewItem *item );
/**
* Accessory slot for AutoSelect/ChangeCursorOverItem
* @internal
*/
void slotOnViewport();
/**
* Process AutoSelection.
* @internal
*/
void slotAutoSelect();
void slotDragExpand();
/**
* Reacts to header changes in full width mode
* @internal
*/
void slotHeaderChanged();
protected:
/**
* Handle dropEvent when itemsMovable() is set to true.
*/
virtual void movableDropEvent (TQListViewItem* parent, TQListViewItem* afterme);
/**
* Where is the nearest TQListViewItem that I'm going to drop?
*
* FIXME KDE 4.0: Make this method const so it can be called from an
* acceptDrag method without ugly casts
*/
virtual void findDrop(const TQPoint &pos, TQListViewItem *&parent, TQListViewItem *&after);
/**
* A special keyPressEvent (for FileManager selection mode).
*/
void fileManagerKeyPressEvent (TQKeyEvent*);
/**
* Convert the depth of an item into its indentation in pixels
*/
int depthToPixels( int depth );
private:
class Tooltip;
protected:
virtual void virtual_hook( int id, void* data );
private:
class TDEListViewPrivate;
TDEListViewPrivate* const d;
bool isExecuteArea( int x, TQListViewItem* item );
};
/**
* A listview item with support for alternate background colors. It is
* a drop-in replacement for QListViewItem
*
* @short listview item with alternate background color support
*/
class TDEUI_EXPORT TDEListViewItem : public TQListViewItem
{
friend class TDEListView;
public:
/**
* constructors. The semantics remain as in TQListViewItem.
* Although they accept a TQListViewItem as parent, please
* don't mix TDEListViewItem (or subclasses) with QListViewItem
* (or subclasses).
*/
TDEListViewItem(TQListView *parent);
TDEListViewItem(TQListViewItem *parent);
TDEListViewItem(TQListView *parent, TQListViewItem *after);
TDEListViewItem(TQListViewItem *parent, TQListViewItem *after);
TDEListViewItem(TQListView *parent,
TQString, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null);
TDEListViewItem(TQListViewItem *parent,
TQString, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null);
TDEListViewItem(TQListView *parent, TQListViewItem *after,
TQString, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null);
TDEListViewItem(TQListViewItem *parent, TQListViewItem *after,
TQString, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null,
TQString = TQString::null, TQString = TQString::null);
virtual ~TDEListViewItem();
virtual void insertItem(TQListViewItem *item);
virtual void takeItem(TQListViewItem *item);
/**
* returns true if this item is to be drawn with the alternate background
*/
bool isAlternate();
/**
* returns the background color for this item
*/
const TQColor &backgroundColor() KDE_DEPRECATED; // #### should be removed in 4.0; use below instead
/**
* returns the background color for this item at given column
* This can be different in the column which is sorted due to shading
* ### could be merged with above (column = -1) to be source compatible
* ### but will only work if sort-shading is not used or the listView has
* ### only 1 column
* @since 3.4
*/
TQColor backgroundColor(int column);
virtual void paintCell(TQPainter *p, const TQColorGroup &cg,
int column, int width, int alignment);
private:
void init();
private:
uint m_odd : 1;
uint m_known : 1;
uint m_unused : 30;
};
#endif
// vim: ts=2 sw=2 et