| Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions | |
The TQProcess class is used to start external programs and to communicate with them. More...
#include <qprocess.h>
Inherits TQObject.
The TQProcess class is used to start external programs and to communicate with them.
You can write to the started program's standard input, and can read the program's standard output and standard error. You can pass command line arguments to the program either in the constructor or with setArguments() or addArgument(). The program's working directory can be set with setWorkingDirectory(). If you need to set up environment variables pass them to the start() or launch() functions (see below). The processExited() signal is emitted if the program exits. The program's exit status is available from exitStatus(), although you could simply call normalExit() to see if the program terminated normally.
There are two different ways to start a process. If you just want to run a program, optionally passing data to its standard input at the beginning, use one of the launch() functions. If you want full control of the program's standard input (especially if you don't know all the data you want to send to standard input at the beginning), use the start() function.
If you use start() you can write to the program's standard input using writeToStdin() and you can close the standard input with closeStdin(). The wroteToStdin() signal is emitted if the data sent to standard input has been written. You can read from the program's standard output using readStdout() or readLineStdout(). These functions return an empty TQByteArray if there is no data to read. The readyReadStdout() signal is emitted when there is data available to be read from standard output. Standard error has a set of functions that correspond to the standard output functions, i.e. readStderr(), readLineStderr() and readyReadStderr().
If you use one of the launch() functions the data you pass will be sent to the program's standard input which will be closed once all the data has been written. You should not use writeToStdin() or closeStdin() if you use launch(). If you need to send data to the program's standard input after it has started running use start() instead of launch().
Both start() and launch() can accept a string list of strings each of which has the format, key=value, where the keys are the names of environment variables.
You can test to see if a program is running with isRunning(). The program's process identifier is available from processIdentifier(). If you want to terminate a running program use tryTerminate(), but note that the program may ignore this. If you really want to terminate the program, without it having any chance to clean up, you can use kill().
As an example, suppose we want to start the uic command (a TQt command line tool used with TQt Designer) and perform some operations on the output (the uic outputs the code it generates to standard output by default). Suppose further that we want to run the program on the file "small_dialog.ui" with the command line options "-tr i18n". On the command line we would write:
uic -tr i18n small_dialog.ui
A code snippet for this with the TQProcess class might look like this:
UicManager::UicManager()
{
proc = new TQProcess( this );
proc->addArgument( "uic" );
proc->addArgument( "-tr" );
proc->addArgument( "i18n" );
proc->addArgument( "small_dialog.ui" );
connect( proc, SIGNAL(readyReadStdout()),
this, SLOT(readFromStdout()) );
if ( !proc->start() ) {
// error handling
}
}
void UicManager::readFromStdout()
{
// Read and process the data.
// Bear in mind that the data might be output in chunks.
}
Although you may need quotes for a file named on the command line (e.g. if it contains spaces) you shouldn't use extra quotes for arguments passed to addArgument() or setArguments().
The readyReadStdout() signal is emitted when there is new data on standard output. This happens asynchronously: you don't know if more data will arrive later.
In the above example you could connect the processExited() signal to the slot UicManager::readFromStdout() instead. If you do so, you will be certain that all the data is available when the slot is called. On the other hand, you must wait until the process has finished before doing any processing.
Note that if you are expecting a lot of output from the process, you may hit platform-dependent limits to the pipe buffer size. The solution is to make sure you connect to the output, e.g. the readyReadStdout() and readyReadStderr() signals and read the data as soon as it becomes available.
Please note that TQProcess does not emulate a shell. This means that TQProcess does not do any expansion of arguments: a '*' is passed as a '*' to the program and is not replaced by all the files, a '$HOME' is also passed literally and is not replaced by the environment variable HOME and the special characters for IO redirection ('>', '|', etc.) are also passed literally and do not have the special meaning as they have in a shell.
Also note that TQProcess does not emulate a terminal. This means that certain programs which need direct terminal control, do not work as expected with TQProcess. Such programs include console email programs (like pine and mutt) but also programs which retquire the user to enter a password (like su and ssh).
Some Windows commands, for example, dir, are not provided by separate applications, but by the command interpreter. If you attempt to use TQProcess to execute these commands directly it won't work. One possible solution is to execute the command interpreter itself (cmd.exe on some Windows systems), and ask the interpreter to execute the desired command.
Under Windows there are certain problems starting 16-bit applications and capturing their output. Microsoft recommends using an intermediate application to start 16-bit applications.
See also TQSocket, Input/Output and Networking, and Miscellaneous Classes.
This enum type defines the communication channels connected to the process.
See also setCommunication() and communication().
See also setArguments(), addArgument(), and start().
The process is not started. You must call start() or launch() to start the process.
See also setArguments(), addArgument(), and start().
The process is not started. You must call start() or launch() to start the process.
See also setArguments(), addArgument(), and start().
If the process is running, it is not terminated! The standard input, standard output and standard error of the process are closed.
You can connect the destroyed() signal to the kill() slot, if you want the process to be terminated automatically when the instance is destroyed.
See also tryTerminate() and kill().
The first element in the list of arguments is the command to be executed; the following elements are the command's arguments.
See also arguments() and setArguments().
Example: process/process.cpp.
Note that if you want to iterate over the list, you should iterate over a copy, e.g.
TQStringList list = myProcess.arguments();
TQStringList::Iterator it = list.begin();
while( it != list.end() ) {
myProcessing( *it );
++it;
}
See also setArguments() and addArgument().
See also readLineStderr() and canReadLineStdout().
See also readLineStdout() and canReadLineStderr().
See also setArguments() and addArgument().
This function also deletes any pending data that has not been written to standard input.
See also wroteToStdin().
See also setCommunication().
If normalExit() is FALSE (e.g. if the program was killed or crashed), this function returns 0, so you should check the return value of normalExit() before relying on this value.
See also normalExit() and processExited().
See also normalExit(), exitStatus(), and processExited().
The nice way to end a process and to be sure that it is finished, is to do something like this:
process->tryTerminate();
TQTimer::singleShot( 5000, process, SLOT( kill() ) );
This tries to terminate the process the nice way. If the process is still running after 5 seconds, it terminates the process the hard way. The timeout should be chosen depending on the time the process needs to do all its cleanup: use a higher value if the process is likely to do a lot of computation or I/O on cleanup.
The slot returns immediately: it does not wait until the process has finished. When the process terminates, the processExited() signal is emitted.
See also tryTerminate() and processExited().
If env is null, then the process is started with the same environment as the starting process. If env is non-null, then the values in the string list are interpreted as environment setttings of the form key=value and the process is started with these environment settings. For convenience, there is a small exception to this rule under Unix: if env does not contain any settings for the environment variable LD_LIBRARY_PATH, then this variable is inherited from the starting process.
Returns TRUE if the process could be started; otherwise returns FALSE.
Note that you should not use the slots writeToStdin() and closeStdin() on processes started with launch(), since the result is not well-defined. If you need these slots, use start() instead.
The process may or may not read the buf data sent to its standard input.
You can call this function even when a process that was started with this instance is still running. Be aware that if you do this the standard input of the process that was launched first will be closed, with any pending data being deleted, and the process will be left to run out of your control. Similarly, if the process could not be started the standard input will be closed and the pending data deleted. (On operating systems that have zombie processes, TQt will also wait() on the old process.)
The object emits the signal launchFinished() when this function call is finished. If the start was successful, this signal is emitted after all the data has been written to standard input. If the start failed, then this signal is emitted immediately.
See also start() and launchFinished().
The data buf is written to standard input with writeToStdin() using the TQString::local8Bit() representation of the strings.
This signal is emitted when the process was started with launch(). If the start was successful, this signal is emitted after all the data has been written to standard input. If the start failed, then this signal is emitted immediately.
This signal is especially useful if you want to know when you can safely delete the TQProcess object when you are not interested in reading from standard output or standard error.
See also launch() and TQObject::deleteLater().
See also isRunning(), exitStatus(), and processExited().
This signal is emitted when the process has exited.
See also isRunning(), normalExit(), exitStatus(), start(), and launch().
Example: process/process.cpp.
Under Unix the return value is the PID of the process, or -1 if no process belongs to this object.
Under Windows it is a pointer to the PROCESS_INFORMATION struct, or 0 if no process is belongs to this object.
Use of this function's return value is likely to be non-portable.
By default, the text is interpreted to be in Latin-1 encoding. If you need other codecs, you can set a different codec with TQTextCodec::setCodecForCStrings().
See also canReadLineStderr(), readyReadStderr(), readStderr(), and readLineStdout().
By default, the text is interpreted to be in Latin-1 encoding. If you need other codecs, you can set a different codec with TQTextCodec::setCodecForCStrings().
See also canReadLineStdout(), readyReadStdout(), readStdout(), and readLineStderr().
If there is no data to read, this function returns a TQByteArray of size 0: it does not wait until there is something to read.
See also readyReadStderr(), readLineStderr(), readStdout(), and writeToStdin().
If there is no data to read, this function returns a TQByteArray of size 0: it does not wait until there is something to read.
See also readyReadStdout(), readLineStdout(), readStderr(), and writeToStdin().
Example: process/process.cpp.
This signal is emitted when the process has written data to standard error. You can read the data with readStderr().
Note that this signal is only emitted when there is new data and not when there is old, but unread data. In the slot connected to this signal, you should always read everything that is available at that moment to make sure that you don't lose any data.
See also readStderr(), readLineStderr(), and readyReadStdout().
This signal is emitted when the process has written data to standard output. You can read the data with readStdout().
Note that this signal is only emitted when there is new data and not when there is old, but unread data. In the slot connected to this signal, you should always read everything that is available at that moment to make sure that you don't lose any data.
See also readStdout(), readLineStdout(), and readyReadStderr().
Example: process/process.cpp.
TQProcess does not perform argument substitutions; for example, if you specify "*" or "$DISPLAY", these values are passed to the process literally. If you want to have the same behavior as the shell provides, you must do the substitutions yourself; i.e. instead of specifying a "*" you must specify the list of all the filenames in the current directory, and instead of "$DISPLAY" you must specify the value of the environment variable DISPLAY.
Note for Windows users. The standard Windows shells, e.g. command.com and cmd.exe, do not perform file globbing, i.e. they do not convert a "*" on the command line into a list of files in the current directory. For this reason most Windows applications implement their own file globbing, and as a result of this, specifying an argument of "*" for a Windows application is likely to result in the application performing a file glob and ending up with a list of filenames.
See also arguments() and addArgument().
commFlags is a bitwise OR of the flags defined by the Communication enum.
The default is Stdin|Stdout|Stderr.
See also communication().
Setting the working directory is especially useful for processes that try to access files with relative paths.
See also workingDirectory() and start().
If env is null, then the process is started with the same environment as the starting process. If env is non-null, then the values in the stringlist are interpreted as environment setttings of the form key=value and the process is started in these environment settings. For convenience, there is a small exception to this rule: under Unix, if env does not contain any settings for the environment variable LD_LIBRARY_PATH, then this variable is inherited from the starting process; under Windows the same applies for the environment variable PATH.
Returns TRUE if the process could be started; otherwise returns FALSE.
You can write data to the process's standard input with writeToStdin(). You can close standard input with closeStdin() and you can terminate the process with tryTerminate(), or with kill().
You can call this function even if you've used this instance to create a another process which is still running. In such cases, TQProcess closes the old process's standard input and deletes pending data, i.e., you lose all control over the old process, but the old process is not terminated. This applies also if the process could not be started. (On operating systems that have zombie processes, TQt will also wait() on the old process.)
See also launch() and closeStdin().
Example: process/process.cpp.
The slot returns immediately: it does not wait until the process has finished. When the process terminates, the processExited() signal is emitted.
See also kill() and processExited().
See also setWorkingDirectory() and TQDir::current().
This function always returns immediately. The data you pass to writeToStdin() is copied into an internal memory buffer in TQProcess, and when control goes back to the event loop, TQProcess will starting transferring data from this buffer to the running process. Sometimes the data will be transferred in several payloads, depending on how much data is read at a time by the process itself. When TQProcess has transferred all the data from its memory buffer to the running process, it emits wroteToStdin().
Note that some operating systems use a buffer to transfer the data. As a result, wroteToStdin() may be emitted before the running process has actually read all the data.
See also wroteToStdin(), closeStdin(), readStdout(), and readStderr().
The string buf is handled as text using the TQString::local8Bit() representation.
This signal is emitted if the data sent to standard input (via writeToStdin()) was actually written to the process. This does not imply that the process really read the data, since this class only detects when it was able to write the data to the operating system. But it is now safe to close standard input without losing pending data.
See also writeToStdin() and closeStdin().
This file is part of the TQt toolkit. Copyright © 1995-2007 Trolltech. All Rights Reserved.
| Copyright © 2007 Trolltech | Trademarks | TQt 3.3.8
|