tdehwlib: Adjusted parsing of battery information

+ Added initialization of all values
  Some batteries do not provide all values and, without
  initialization, values may contain dubious data.
+ Added reading of current battery capacity value in percent
  (capacity)
  Some batteries may provide the current capacity value in
  percent instead of the current energy value.
+ Added check whether the battery provides current energy value
  (charge_now or energy_now)
  The current energy is calculated if the value is not provided
  in the battery information.
+ Added reading of estimated time to empty battery
  (time_to_empty_now)
  The remaining time is calculated if the value is not provided
  in the battery information.
  If the battery does not provide charging current information,
  the estimated time to charge the battery cannot be calculated.

Signed-off-by: Slávek Banko <slavek.banko@axis.cz>

tdecore/tdehw/tdebatterydevice.cpp

@@ -21,7 +21,14 @@
 
 #include "config.h"
 
-TDEBatteryDevice::TDEBatteryDevice(TDEGenericDeviceType::TDEGenericDeviceType dt, TQString dn) : TDEGenericDevice(dt, dn) {
+TDEBatteryDevice::TDEBatteryDevice(TDEGenericDeviceType::TDEGenericDeviceType dt, TQString dn) :
+ m_currentVoltage(0), m_minimumVoltage(0), m_maximumVoltage(0), m_maximumDesignVoltage(0),
+ m_alarmEnergy(0), m_currentEnergy(0), m_maximumEnergy(0), m_maximumDesignEnergy(0),
+ m_dischargeRate(0), m_timeRemaining(0),
+ m_technology(TQString::null),
+ m_status(TDEBatteryStatus::Unknown),
+ m_installed(0),
+ TDEGenericDevice(dt, dn) {
 }
 
 TDEBatteryDevice::~TDEBatteryDevice() {

tdecore/tdehw/tdehardwaredevices.cpp

@@ -3023,6 +3023,9 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 		TQDir valuesdir(valuesnodename);
 		valuesdir.setFilter(TQDir::All);
 		TQString nodename;
+		double bdevice_capacity = 0;
+		bool bdevice_has_energy = false;
+		bool bdevice_has_time_to_empty = false;
 		const TQFileInfoList *dirlist = valuesdir.entryInfoList();
 		if (dirlist) {
 			TQFileInfoListIterator valuesdirit(*dirlist);
@@ -3092,6 +3095,9 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					if (nodename == "alarm") {
 						bdevice->internalSetAlarmEnergy(line.toDouble()/1000000.0);
 					}
+					else if (nodename == "capacity") {
+						bdevice_capacity = line.toDouble();
+					}
 					else if (nodename == "charge_full" || nodename == "energy_full") {
 						bdevice->internalSetMaximumEnergy(line.toDouble()/1000000.0);
 					}
@@ -3100,6 +3106,7 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					}
 					else if (nodename == "charge_now" || nodename == "energy_now") {
 						bdevice->internalSetEnergy(line.toDouble()/1000000.0);
+						bdevice_has_energy = true;
 					}
 					else if (nodename == "manufacturer") {
 						bdevice->internalSetVendorName(line.stripWhiteSpace());
@@ -3122,6 +3129,11 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 					else if (nodename == "technology") {
 						bdevice->internalSetTechnology(line);
 					}
+					else if (nodename == "time_to_empty_now") {
+						// Convert from minutes to seconds
+						bdevice->internalSetTimeRemaining(line.toDouble()*60);
+						bdevice_has_time_to_empty = true;
+					}
 					else if (nodename == "voltage_min_design") {
 						bdevice->internalSetMinimumVoltage(line.toDouble()/1000000.0);
 					}
@@ -3134,16 +3146,23 @@ void TDEHardwareDevices::updateExistingDeviceInformation(TDEGenericDevice* exist
 			}
 		}
 
-		// Calculate time remaining
-		// Discharge/charge rate is in watt-hours
-		// Energy is in watt-hours
-		// Therefore, energy/rate = time in hours
-		// Convert to seconds...
-		if (bdevice->status() == TDEBatteryStatus::Charging) {
-			bdevice->internalSetTimeRemaining(((bdevice->maximumEnergy()-bdevice->energy())/bdevice->dischargeRate())*60*60);
+		// Calculate current energy if missing
+		if (!bdevice_has_energy) {
+			bdevice->internalSetEnergy(bdevice_capacity*bdevice->maximumEnergy()/100);
 		}
-		else {
-			bdevice->internalSetTimeRemaining((bdevice->energy()/bdevice->dischargeRate())*60*60);
+
+		// Calculate time remaining
+		if (bdevice->dischargeRate() > 0) {
+			// Discharge/charge rate is in watt-hours
+			// Energy is in watt-hours
+			// Therefore, energy/rate = time in hours
+			// Convert to seconds...
+			if (bdevice->status() == TDEBatteryStatus::Charging) {
+				bdevice->internalSetTimeRemaining(((bdevice->maximumEnergy()-bdevice->energy())/bdevice->dischargeRate())*60*60);
+			}
+			else if (!bdevice_has_time_to_empty) {
+				bdevice->internalSetTimeRemaining((bdevice->energy()/bdevice->dischargeRate())*60*60);
+			}
 		}
 	}